Waterproof Connector Options
What IP67 Covers
IP67 means dust-tight and protected against temporary immersion, tested at 1 m depth for 30 minutes.

Mating State
- Mated
- The rating applies only to a fully mated plug and socket.
- Unmated
- An open plug or socket falls outside the IP67 rating. Keep it capped during maintenance.

Panel Joint
- Flange seal
- The socket seals to the panel at its flange. Cutout size, panel flatness and flange screw torque set that seal.
- Rear termination
- The termination behind the panel sits inside the enclosure, outside the IP67 interface.

Cable Entry
- Sheath diameter
- The plug's cable entry is sized to the outer sheath of one cable. A different cable needs a different cable-entry size.
- JTY assembly
- JTY makes the cable entry before shipment. Your installer fixes the socket and mates the plug.
Outdoor Conditions Beyond IP67
Salt air, humidity swings and temperature extremes are tested separately from IP67.
Salt spray
Coastal sites need salt-spray results. JTY runs them on samples in its own salt-spray tester.
Humidity and condensation
A sealed cabinet still traps moisture that condenses when temperatures change. A constant temperature and humidity chamber cycles samples through those changes.
Temperature
The CN series operates from −40°C to +125°C. Samples are aged in the high and low temperature aging chamber at the temperatures on your test request.
Waterproof Battery Connector FAQ
IP67. IP68 is the rating for continuous immersion under conditions the manufacturer states, and the CN series carries no IP68 rating.
No. High-pressure, high-temperature washdown is a separate test, IPX9 under IEC 60529, and the CN series carries no IPX9 rating.
No. IP codes do not rate sunlight. List direct sun exposure in your enquiry.
For a complete terminated assembly, see the Waterproof Wire Harness.
Contact Us
Send your drawing and the site conditions of the cabinet.



