Data Center Power
Cable Assemblies

JTY manufactures terminal leads, connector-ended cables and branched harnesses to your drawing or sample. Supply covers prototype builds and production orders.

Red and black JTY cable assembly with a gray two-pole connector and ring terminals.
Browse Cable Assemblies

Cable assemblies for data center equipment builds

Equipment OEMs, contract manufacturers and integrators can order finished assemblies.

From assembly requirement to production

JTY reviews the assembly and order requirements for quotation. JTY can make a sample for the equipment team to check the ends and routing before production.

Discuss Your Assembly Build

Made in JTY’s plant

10Assembly lines
30+Machines
JTY operator processing a cable terminal at a crimping machine.

Terminal processing

JTY crimps contacts and ring terminals on automatic machines and bench presses.

JTY production staff assembling cable and connector components.

Housing and harness assembly

JTY fits terminated wires into connector housings using automatic insertion equipment and manual stations.

Injection molding workstations in JTY’s production workshop.

Molded cable exits

JTY molds custom cable ends in its workshop.

Electrical & Assembly Inspection

JTY operator using electronic-load test equipment.

Electrical

JTY can check continuity, polarity and pin assignment. JTY can measure circuit resistance. JTY can test insulation at withstand voltage.

JTY operator using dimensional measurement equipment.

Dimensions & Terminations

JTY measures terminal, crimp and molded-end dimensions on a 2D optical instrument. Cross-section examination shows conductor fill and insulation grip.

Mechanical & Environmental

JTY can test cable bending and connector mating force. Equipment also supports salt spray, damp heat and high- and low-temperature ageing checks.

Component sourcing for your assembly

JTY sample cable assemblies with connector and terminal ends.

JTY-sourced components

JTY sources the wire and connectors specified in the drawing for assembly.

Customer-supplied connectors

JTY can assemble connectors supplied by the customer into the harness.

Connector or cable substitutions proposed by JTY require customer approval before production.

Questions before ordering

Does every connector assembly require a new mold?

Stock connector housings need no new mold. New molds carry a separate mold charge.

Contact Us

Tell JTY about your connector, wire harness or cable assembly project. Share the drawings, specifications or sample details you have for an initial review.

    No file selected

    PDF, XLSX, CSV, JPG or PNG · up to 5 MB. Need an NDA? Mention it above.

    Samples in 3–7 days. Batch production about 30 days after order confirmation.

    * Required fields

    Concept illustration of a wire harness sample beside a drawing and inspection checklist Your Project
    PRODUCT CONCEPT