Battery Cable Types

Battery-to-Inverter Cables

A red and black pair that runs from the battery terminals to the inverter DC input.

Battery Parallel Links

Short lug-to-lug jumpers between batteries in one bank. JTY cuts every link in a bank to one length. Equal link lengths help keep cable resistance consistent; current sharing also depends on the batteries and connection layout.

Battery-to-Busbar Leads

A single cable with one lug on the battery terminal and one lug on a busbar. On the 120A and 250A groups of battery bolt connectors, the battery-connector end takes the group's JG lug.

Battery Cable Specifications

ItemRange
AWG cable6 AWG to 4/0 AWG
Metric cable10 mm² to 185 mm²
PVC cableUL 1015, 600V, 105°C. UL 1032, 1000V, 90°C
Silicone cableUL 3512, 600V, 200°C
Ring lugsTinned copper lugs for 5/16", 3/8" and 1/2" studs. JG copper lugs for M6, M8 and M10 studs, on cable up to 120 mm²
Lug sealingAdhesive-lined heat shrink over each lug barrel
ColoursRed and black
LengthAs drawn

Choosing the Cable

Braided sleeve over a JTY cable assembly.

PVC or silicone

PVC cable serves a run fixed along a cabinet wall, where the cable does not flex.

Silicone cable stays flexible in tight bends behind an inverter or inside a battery box.

Where a silicone lead crosses a sheet-metal edge, JTY fits a braided sleeve over it.

Size for current and run length

For a long battery-to-inverter run, the quote can step up one cable size to cut the voltage drop.

For a cable that ends in a CN plug, the high current battery connector table lists the available connector ratings and matching cable sizes.

Silicone lead from a JTY cable assembly with its AWM 3512 print.

Cable marking

The photographed JTY lead reads AWM 3512, 6 AWG, 200°C, 600V, VW-1.

Crimping and Checks

Lug crimping

JTY crimps each lug onto the cable before cutting the far end to length.

The first samples arrive with a crimp cross-section report for approval.

Electrical tests

Sample cables are measured for end-to-end resistance on JTY's precision resistance meter.

Sample cables are also tested on JTY's withstand-voltage tester.

Precision resistance measurement at JTY.
Withstand-voltage testing at JTY.

Harnesses with Connectors

Battery Cable Assembly FAQ

JTY quotes the size system used on your drawing. An AWG size and the nearest metric size differ in conductor area.

Contact Us

List each cable’s size, insulation type, length and the stud size at each end, with the quantity of each colour.

    No file selected

    PDF, XLSX, CSV, JPG or PNG · up to 5 MB. Need an NDA? Mention it above.

    Samples in 3–7 days. Batch production about 30 days after order confirmation.

    * Required fields

    Concept illustration of a wire harness sample beside a drawing and inspection checklistYour Project
    PRODUCT CONCEPT