Bolt Connectors

Bolted power connections with catalogue options for cable termination and panel installation. For panel cutouts and fastening, see the battery bolt connector application guide.

Housing
PA66
Contact material
Nickel-plated H59 brass
Cable and current options
120A catalogue model
10 / 16 / 25 mm² · 70 / 100 / 120 A
250A catalogue model
30 / 50 mm² · 150 / 250 A
400A catalogue model
120 mm² · 400 A

JTY catalogue, printed page 12. Each row lists model-level options; the first two rows do not establish a one-to-one cable/current pairing. The general technical table lists 100 / 120 / 400 A and differs from the model table. Use the selected part specification for ordering.

Bolted connector construction.

Flange and terminal connection

Compare the flange position and exposed terminal geometry before choosing a part. The black, red and orange catalogue views do not establish a polarity assignment.

Panel fit and cable termination.

Mounting footprint

The catalogue panel reference shows 23 ±0.1 mm fixing pitch in both directions, an Ø18.5 mm opening with +0.3 / −0 tolerance, and a 4-M4 callout. Use the selected part drawing before machining.

Cable joint

Include the cable section, lug or terminal reference and joint stack in the enquiry. The quoted assembly drawing should identify the hardware and tightening requirement for that joint.

Include this product in inquiry

Contact Us

Tell JTY about your connector, wire harness or cable assembly project. Share the drawings, specifications or sample details you have for an initial review.

    No file selected

    PDF, XLSX, CSV, JPG or PNG · up to 5 MB. Need an NDA? Mention it above.

    Samples in 3–7 days. Batch production about 30 days after order confirmation.

    * Required fields

    Concept illustration of a wire harness sample beside a drawing and inspection checklist Your Project
    PRODUCT CONCEPT