Multiwire Connector Harness RFQ Worksheet Customer requirement worksheet. Attach the drawing or reference the physical sample. Illustrative position labels do not identify an actual connector pinout. Group,Requirement,Customer entry Assembly,Drawing number and revision, Assembly,Construction reference or physical sample, Supply,Cable-side housing reference and quantity, Supply,Contact reference and populated quantity, Supply,Mating-part reference and supply inclusion, Connections,Connector viewing direction and latch orientation, Connections,Populated-position schedule reference, Connections,Unused positions, Wires,Wire specification and conductor size by wire ID, Wires,Wire colour and opposite-end finish by wire ID, Electrical duty,Working voltage and AC or DC, Electrical duty,Current by wire ID and circuits loaded together, Electrical duty,Ambient temperature and installation environment, Fit,"Length datum, measurement path and wire condition", Fit,Finished wire length and tolerance by wire ID, Fit,"Covering type, length and end positions", Fit,"Identifier text, location and reading direction", Quantity,Prototype quantity, Quantity,Production quantity, Inspection,"Requested checks, references, methods and limits", Inspection,Sample quantities and requested records, Connector reference,Position,Populated or unused,Wire ID,Wire specification,Colour,Opposite-end reference,Opposite-end finish J1,J1-A,Populated,W01,,Black,,"E01, cut end" J1,J1-B,Populated,W02,,White,,"E02, contact C2" J1,J1-C,Unused,Unused,,None,,None "J1-A, J1-B, J1-C, W01 and W02 are illustrative worksheet labels. Replace them with the references in the order drawing." Wire ID,Length datum,Measurement path and wire condition,Finished length and tolerance,Covering end positions,Identifier text and position Check,Drawing or component reference,Method or acceptance limit,Sample quantity,Requested record